Benefits of a charred wood facility

Yakisugi is a wood preservation that has always been used in Japan. Experienced a renaissance in the 21st century. The carbonization of the surface make the wood underneath more resistant, durable and waterproof.

Burnt Wood Cladding

This method according to the Yakisugi method of the 18th century serves to protect the wood against fire, water, fungal infestation, pests, etc. This allows both house facades and furniture to be clad.
The advantages are obvious:

  • Higher robustness, stability, resilience
  • No annoying insects or annoying fungal infestations
  • Increased longevity
  • Very decorative
  • Wood grain is better revealed
  • Virtually no care is needed.

In Japan, cedar wood is used for this purpose. In Europe, especially Germany and Austria, Larch wood is used for Burnt Wood Cladding. However, other local types of wood are often used in European farms. Three wooden slats are joined together. This looks like a triangle of three boards. Then the inside is charred without burning the wood. For this purpose, paper is placed in the triangle. Some companies prefer to use flame retardant. Because the wood feels like silk, as the wood likes to call “silk wood”. The typical sign of this is a silvery shimmer. Afterwards, the wood processed in this way is brushed. The beautiful grain comes to light.

Furniture with Burnt Wood Cladding

Furniture can either be made with this type of wood or can be treated directly with fire. This makes stunning furniture unique for both indoor and outdoor use. Silk wood is ideal for facade cladding or for outdoor furniture. Indoor furniture as well as panelling of counters, entire bar facilities and hotel interiors, combined with some light wood parts, have an unmistakable, individual look.

The boundaries of Burnt Wood Cladding.

Silk wood is suitable for the complete interior and exterior. This type of interior design is becoming increasingly popular in hotels, bars and restaurants. Trade has already jumped on this bandwagon. Especially in winter ski areas, more and more shop operators are equipping their restaurants and shops with silk wood. In addition, many private individuals have also enjoyed Burnt Wood Cladding beds, tables, dressers, boxes and armchairs. Some carpentry and retailers have already adapted to this trend.

Why doesn’t silk wood disintegrate after the Burt Wood Cladding?

After treatment, the wood is sealed. Thus, the wooden structure is preserved and stable. Depending on whether hard wood or softwood is treated according to this process technique, finer or coarser grains result. Softwood shows a coarser structure after treatment. Classically, silk wood is offered in spruce, 400 cm long and 15 cm wide. Silk wood boards are installed by simple screwing with the substructure.

Can different types of Burnt Wood Cladding be combined?

As usual, silk wood furniture made of hard wood or softwood can of course be combined with each other. Of course, this also applies to cladding on the ceiling, walls and counter. Waiting areas create real highlights with panelling according to this method and colourful decoration.


Where can Burnt Wood Cladding facilities be purchased?

These are offered in renowned online retail, traditional joinery and specialist shops. Some carpentry shops specialize in silk wood.

What needs to be considered when setting up Burnt Wood Cladding furniture?

Since the furniture and the attached cladding are sealed and are more resistant due to the process, there is nothing special to consider. Here it only depends on the taste and the optical placement.

Can heat, cold and humidity Burn Wood Cladding furniture become dangerous?

No problem as Burn Wood Cladding facades can withstand wind and weather without any problems. Due to the special wood treatment, the wood even withstands fire, more information.

Burnt Wood Cladding Boards for the Floor

Silk wood is also suitable for the floor. In Japan, this type of wood is used for almost all construction and furnishing parts. The houses are still standing for centuries and are still in use. It doesn’t matter what type of wood is used. For floors, however, silk wood with a coarser structure is preferred.

Burnt Wood Cladding – Commercial Facilities

In principle, custom-made products are always possible. For this, however, it is absolutely necessary to visit the location in advance. For restaurants, bars or hotels, a uniform look is more important. This highlights the business aspect. The grain in combination with wood gives it a cosy flair. Table linen, crockery or colourful decorative parts loosen up the dark décor a little and provide a personal touch.


Wall cladding in slate

A wall, a facade must be appropriately clad in a house. Such a cladding not only has an optical background, but also serves above all as a weather protection. So that there can be no penetration of moisture in a wall. One option that is very good for wall cladding is slate, stone veneer, as can be seen from the following article.

Slate as wall cladding

To ensure that moisture does not stand a chance on a wall, it is processed accordingly. One option offered here is the cladding of the wall surface. Various materials, such as slate, are suitable for covering a wall surface. Slate, especially natural slate, also called Stone veneer, is very suitable not only for optical reasons, but also for economic reasons. Thin Stone is characterized by a very long durability.

A slate roof, for example, can have a shelf life of 100 years or more. With a facade, it doesn’t look much different if the substructure here is corresponding. It is precisely the point of cost-effectiveness of Thin stone that should not be lost sight of when it comes to the cost of wall cladding. Certainly, a wall cladding made of slate is associated with high costs. But just when you look at the durability of the product slate, such an investment pays off.

Substructure with slate

Stone_veneerThe a and all of a wall covering with slate, with stone veneer is always the substructure. This is necessary, as the slate must of course be fixed accordingly. A properly fixed installation is necessary, after all, such a wall can be exposed to great weather influences, as well as wind and storm. The substructure is usually made of wood. Here, the substructure can either consist of a slat construction or a full-surface cladding. In order to ensure that moisture does not stand a chance in the substructure, it is important that it is adequately protected and ventilated.

So that there can be no accumulation of moisture here. Moisture wouldn’t hurt the thin stone, but the wooden construction. In order to ensure that the slate is fixed, the assembly is carried out either by means of nails or with screws. With regard to the wall cladding with slate, it should be mentioned that a variety of design possibilities are offered here. There are different deck patterns that can be used. It is also possible to design with slate, including a pattern. Depending on what design you choose with slate, you have a different amount of material requirements. However, this also means that you have a different amount of time required to design the wall.



What is needed for dry ice cleaning?

A dry ice machine for cleaning speeds up dry ice pellets with compressed air to clean contaminated surfaces with the help of a jet gun. In principle, this is similar to the steam or sand blasting. However, these are also the only similarities between the usual procedures. If a surface is to be cleaned, chemicals and abrasives can damage it. This works differently for dry ice blasting, because soft dry ice is used in the process. There is no abrasive effect and the surface is not damaged. The dry ice pellets are about 3 millimeters in size and are almost accelerated to the speed of sound with compressed air. During the encounter, mini-explosions are created, which blow up the structure of contamination caused by the cold shock.

What is a Dry Ice Machine for Cleaning?

With the help of the process, it is possible that the undesirable contamination is reliably separated from a surface to be cleaned. After the impact, the dry ice then passes over to the gaseous state and thus evaporates without leaving any residue. As Dry Ice Blasting Equipment, the dry ice blaster is of course very important. Dry ice and compressed air can often be individually controlled. It is therefore possible to react to the degree of pollution and the specific situation of the surface. Only dissolved attachments are then left behind after an application and, if necessary, they must then be disposed of. Effective cleaning is then possible at every tiny angle and cleaning is always residue-free and environmentally friendly. In addition, the cleaning is also time-saving and surface-gentle.

The right Dry Ice Blasting Equipment

If you have the right equipment, you can enjoy a material-friendly cleaning process. The surface is thus not damaged and to which dry ice is antibacterial. The growth of bacteria and moulds is inhibited by dry ice. Since no chemicals are used, the process is environmentally friendly and also biologically harmless. It can be used in the food, cosmetics and pharmaceutical industries. Cleaning is effective and cleaning many objects are possible without time-consuming disassembly. Production residues such as biofilms, resins, oils and paints can be removed without residues. Thanks to the equipment, any steel element, machine or plant can be cleaned effectively and gently. Cleaning with dry ice is an ecological and economical technology. The dry ice blasting equipment is required accordingly in order to allow cleaning. Otherwise, dry ice is also included, which can also be purchased. The service life of the systems can then be extended and everyone saves costs and time during the process. Electronic components, expensive shapes, soft materials or sensitive materials are also no problem.

black wood

Unique wood with shousugiban

Whether the design of the facade, the cladding in the interior or a piece of furniture, wood is a versatile building material. Used in various areas. If you don’t just want wood, but wood in a very special design, shousugiban is a good place to be. What this is, can be found in the following article.

This is shousugiban

When it comes to wood and shousugiban, this is a Japanese tradition in which the wood is particularly processed. In this case, the surface of the wood is flamed with fire. Depending on the wood and use, the degree of flamemay can be very different. Thus, the flaming of the wood can refer to the entire wood surface or even only to individual elements. For example, if you give furniture a very special design. In which, for example, you can burn figures, rings, circles or whatever else you want into the wood. This gives you a very special look on the surface. Basically, the flame can be done with any wood. But if one follows the Japanese tradition, the larch or the hercin is used here.

How shousugiban is done

When treated with the shousugiban procedure, only fire is used here. It is therefore a completely natural method where no chemistry or the like is used. With a burner, the surface is ignited by the wood. By inflaming, the surface is charred by the wood. Depending on whether the entire surface is flamed or only individual parts, there may be differences in the process. With a burner, for example, you cannot burn a pattern into a piece of furniture. It is important in connection with the burning of the wood, which does not damage it. Thus, the wood does not lose its robustness due to a charred surface. This is not insignificant if the wood is to be used, for example, as a cladding of a facade.

Benefits of shousugiban

Of course, the question always arises: where should the advantages of such a surface treatment be? It’s hard to believe, but by charring the surface of wood, you actually have numerous advantages. For example, no insects or wood pests can enter the wood. Also, a wood through the shousugiban no longer needs care afterwards. So you no longer have to apply wood protection, as the wood is naturally preserved by the charred surface. There is no chance of rain or other influences. This means that normal care measures and the associated costs are eliminated.

Dirt-free surface with Dry ice blasting

Persistent dirt on your car that doesn’t want to disappear? No more problems, because the dry ice blasting removes stubborn dirt in no time and without much effort. But what is it and when can it be used? You will not ask these questions after this article.

What is dry ice blasting?

Dry ice is solidified CO2, which is both odourless and non-toxic. It is created by filling liquid carbon dioxide from a tank into a machine called pelletizer. The carbon dioxide is then relaxed, i.e. it is cooled down to -78.5°C and then pressed through a die. The result is small dry ice pellets. It is then effectively cleaned with the dry ice pellets, which offers some advantages.

How to clean with dry ice or How does dry ice blasting work?

Dry ice blasting is a method by WHITE LION Dry Ice & Laser Cleaning Technology GmbH of cleaning certain surfaces such as cars, but also monuments. It is a compressed air process in which the dry ice flows through compressed air onto the surface to be cleaned. This removes the stubborn dirt without causing damage to the surface. The fine nozzles also result in cleaning only the areas that are to be cleaned. They are some of the appearance of a high-pressure cleaner, but cleaning with a dry ice lighter is much more effective.The dry ice pellets are ejected from the hose with only about 20 bar, which makes handling enormously easier.

Pros and cons

Since the purchase of such a device for dry ice cleaning is relatively expensive and the operation of the machine requires sufficient experience, it is not worthwhile for every household, but can also be a great enrichment. In general, dry ice blasting is suitable for almost all surfaces. Another advantage is the environmentally friendly work and also the diverse use, because it can also be used for hard-to-reach areas. There is no polluting waste that enters the waste water, as with conventional high-pressure cleaners.The device is much heavier and bulkier than a high-pressure cleaner and only runs with dry ice, which means the process requires a lot of effort as dry ice is not easy to acquire. Experience is also required as the cold jet can be dangerous for humans, but also surfaces such as glass. Some surfaces are also not suitable for dry ice blasting. These are mainly surfaces that are softer than the dirt surface and can therefore be damaged more easily. In the end, dry ice blasting is a really effective way to remove stubborn dirt. It is also a very environmentally friendly solution, as there is no waste water.

Change your home in a japanese house

Facades almost always look the same. We all  have seen enough of the concrete walls. Wood would be a refreshing change and can be extremely durable if treated correctly.

Charred wood siding
Wood siding with a window

Charred wood siding makes every house wall unique. With a combustion process each wall gets its own structure and so your house becomes a real eye-catcher in your street. Be a part of an old japan tradition.


Stone veneer: Real stone veneer creates enthusiasm

Anyone who wants to spice up their own home will sooner or later think about a change. Again, it quickly becomes clear that Stone Veneer in particular has currently fought in the focus of interest. It is not really surprising, because the real stone veneer looks breathtakingly beautiful and also makes the house shine in high quality. In addition, the production and processing on the house usually does not take too long, which of course should be important for those in a hurry. Maybe you are also thinking about these stone veneers for your house? It would be worth considering in any case.

Stone veneer – beautiful to look at and flexible in appearance

Stone Veneer does not have to be available in one colour. The slate can be ordered really variable, but it is clear that it has to be prepared. Experienced carpenters are often used here because the stone veneer must of course be shaped accordingly. Maybe for the interior? Or for outside? Basically, there are almost no limits and the optics are very variable. The changing play of colours is a real eye-catcher, so this may also be responsible for your interest? This choice is made in particular for furniture construction or for facades and maybe it will help you to make a decision.

The many areas of application of Stone Veneer

Stone Veneer can really inspire in many ways. How about, for example, the furniture? This slate rock is extremely well received by the customer, and maybe the stone veneer is also something for you? Not to forget that it also comes into its own in the vehicle and stands for more popularity here too. Whether in shipbuilding, furniture, interior design, in the car or in a picture frame – Stone Veneer is certainly a good recommendation for all of this and if you want, you are more than welcome to use it. Perhaps this also applies to you?

Choosing many beauties is not easy, but hopefully Stone Veneer can make the decision for you. After all, the colourful look is really a great eye-catcher. Here you have to say clearly that you should access and why not? It looks good and if you know where this stone veneer would look good on you, you can grab it. It’s popular, easy to work with, looks great, and very affordable in price. And now it’s your turn, how do you find this stone veneer and can you inspire it?


Shousugiban – Asian Origin

Controlled wood charring can protect the facades, but many people don’t know Shousugiban. The process is not new and it was already used in antiquity to preserve wood and thus protect against insects and rot. The version originates from Japan and therefore there is also the name Shousugiban or Yakisugi for the controlled burning of wood. More and more people are discovering their love for charred wood.

What should Shousugiban consider?

Wood can do much more than just heat an oven. The technique at Shousugiban shows this and it is about charring from the outer layer. The material can be preserved with it and the coal then forms the natural protection against vermin and fungi. Regular renewal, pickhering, paint scoating and wood preservatives are thus eliminated. Excavations have already shown that construction work with charcoal was often fortified. Charred piles were also used for the construction of a house. There is still the technology to char wood. The technique translates to flamed or grilled. The Japanese cedar is mainly used and in the European area also larch, pine or other types of wood. The technology is still used in house building on the Japanese island of Naoshima, and residents say the facades survive the periods of forty to eighty years without any post-treatment.

Important information for Shousugiban

Charcoal is produced whenever the dry wood is heated to 275 degrees Celsius without oxygen supply. Components such as resins can eventually burn. The thermally insulating protective layer is then formed and the fire is always carried out in a controlled manner, so that the corresponding charring depth is reached. It is important that this is also extinguished at the right time with the water. The traditional Japanese charcoal uses three boards that are tied together to form the triangular tube and this is inflamed with a paper. They are separated after charring and extinguished with water. The wood is then cleaned and treated with the natural oil. The boards turn black or red-brown depending on the type of oil or burning time. These are not only aesthetic reasons for Shousugiban, but also ecological reasons for it. The material is purely organic and it passes from the life span of the buildings into the rotting process without chemical contamination. This is, of course, in the sense of cyclical use of resources. The burnt wood is used not only in the interior, but also outdoors.

Read more

Private Label’s interesting facts

One of the business models that grows the most is the private labeling or private label. This is about the English term for trademarks. This refers to products specially manufactured for retailers and branded by a private label. The relevant dealer sells as the product manufactured by the manufacturer as his goods under his own flag.

Private Label

How Private Label Works

Many people dream of selling their own goods with a specially created brand. However, many are wondering how such a thing should be done. After all, who has their own production facility to produce their own articles? And who knows exactly how to make such products? Even if this were possible, materials and machines would cost a lot of money. Therefore, the solution is a private label for anyone who still wants to sell their own goods. However, this business model has been around for a particularly long time. The typical example are the food brands of large supermarket chains, such as good & cheap from Edeka or yes from Rewe. The total turnover of such brands in the food industry is estimated at 40 percent. This shows how big the business model is. In this case, the supermarket chains do not act as producers of these goods.

Production was outsourced to large manufacturers and manufacturers, who created the corresponding item as a product without a brand and offered it for sale to various trading companies. In doing so, the producer brandishes the respective goods as the trading company wants and sells the finished item to the trading company. The company sells the product as its own item to the end user. The trading company legally acts as a producer of the goods on the market. He is also responsible for the article. In this respect, it must comply with all relevant rights and obligations. As a trading company, one is not bound to the actual manufacturer. This means that if A’s cheese becomes too expensive, the supermarket chain would have the opportunity to look for a new manufacturer without putting the brand in jeopardy. The supermarket chains rely on several manufacturers. Thus, an item is not only delivered by one producer, but divided into some. After all, the supermarket brand is on top of it.

Where private label is still common

Private labels are by no means just available in the food industry. The business model can be applied to all imaginable products. It doesn’t matter if it’s about electrical appliances, drugstore articles, consumer products or animal supplies. There are large manufacturers everywhere who create unbranded articles for trading companies, which can then be resold as their own goods.

How private labels can be interesting for everyone

Due to the ever-increasing digitalization and globalization, it is no longer only possible for large companies to create their own private labels. This is how everyone can sell their branded goods these days. Goods in the lower price range, in particular between ten and 40 euros, are suitable for entry, so that you can also become entrepreneurial as an individual with a fairly low start-up capital with a private label.

Dry ice cleaning

Dry Ice Blasting is a true industrial cleaning solution. Dry ice cleaning blasting is thought by a number of names: dry ice blasting, dry ice cleaning, and CO2 blasting. AS: Dry ice blasting for industrial cleaning is in high demand. Dry ice blasting is known by a number of names: dry ice blasting, dry ice cleaning, CO2 blasting, dry ice dusting, and even environmentally sustainable cleansing.

Many machines used within the meals processing business and medical and care sector can not get wet beneath any circumstances. Dry Ice cleaning is an environment friendly and value-efficient industrial cleansing system, which helps industries to maximise production capability and high quality. Dry Ice Blasting is a comparatively new cleansing process using strong CO2 pellets (often known as dry ice).  Mostly often known as dry ice blasting – and also known as dry ice cleansing, strong CO2 blasting.

Dry ice cleaning has several benefits in comparison with steam and water blasting. This makes dry ice blasting a very effective method to scrub industrial equipment because surfaces dry nearly immediately so there isn’t any need to shut down manufacturing for lengthy. Dry ice blasting also known as Dry Ice Cleaning , CO2 Blasting, was developed as a protected, clean various to bead, grit, and sand blasting.

Learn the way dry ice blasting has revolutionized cleansing in your sector by clicking on the industry under. Dry-ice blasting technology can trace its roots to traditional abrasive blasting The differences between an abrasive-blasting machine and a dry-ice blasting machine are in how they deal with the blast media. The choice of making dry ice when wanted makes cleaning more environment friendly. Dry Ice Blasting is a perfect cleansing technique to help any firm meet an ISO 14000 customary. There’s additionally no residue or secondary waste to clean, so you can use it with meals processing equipment. Dry ice blasting has many distinctive and superior advantages over conventional blasting media.

Dry Ice Blasting is the superior alternative to sand blasting, shot blasting, soda blasting, water blasting & hand cleaning. Dry ice cleansing (also referred to as dry ice blasting, dry ice blast cleansing, and dry ice dusting) is much like sand blasting, plastic bead blasting, or soda blasting the place a medium is accelerated in a pressurized air stream to influence a floor to be cleaned or ready.

Dry Ice Cleaning (aka Dry Ice Blasting) is a process by which particles of solid carbon dioxide (dry ice grains) are shot out of a sprig nozzle at high velocity to wash a floor. Dry ice blast cleansing is much like standard media blasting except that the abrasive media is changed by pellets of dry ice which literally disappear as quickly because the cleaning cycle is complete. Dry Ice Blasting is an industrial cleaning process wherein particles of solid carbon dioxide are propelled at high velocities to impression and clean a surface.